Your Home, Treated Like Our Own
Clean workspaces, careful craftsmanship, and total respect for your property.
Heating & Furnace Repair in Fort Worth, TX
When your heating system stops working, especially during Fort Worth’s sudden winter cold snaps, it creates a real urgency that calls for a fast, accurate response. HAT Plumbing, Heating & Air provides heating repair services for residential properties throughout Fort Worth and across Tarrant County. Our TDLR-licensed technicians are trained to diagnose and repair a range of heating equipment, from gas furnaces and electric systems to heat pumps and packaged units.
Over 20 years of field experience have seen the team serve a full range of heating failures common in the North Texas region, from ignition and blower motor issues to failed heat exchangers and thermostat malfunctions. We don't just fix the symptoms; we identify the root cause, so the same issue doesn't resurface two weeks later.
We offer flat-rate, transparent pricing that applies to every repair job. There are no after-the-fact add-ons, no estimates that double by the time the invoice arrives. Our company is fully licensed and insured, and all repair work is warranted. We serve residential homeowners clients with same-day repair availability means you're not waiting days to get your heating system back online. We've got you covered.
Call (817) 405-4575 or reach us online for fast, reliable heating repair in Fort Worth.
Heating Problems We Diagnose and Repair
Heating systems give off warning signs before they fail completely. Recognizing these early can mean the difference between a straightforward repair and an emergency. HAT Plumbing, Heating & Air technicians are trained to diagnose and repair a wide range of heating system issues, including:
- Furnace not producing heat or producing insufficient heat
- Pilot light or igniter failures on gas furnaces
- Faulty heat exchanger (a serious safety concern that causes carbon monoxide risk)
- Blower motor issues causing weak or no airflow
- Heat pump running in cooling mode or failing to switch to heat mode
- Tripped breakers, blown fuses, or electrical control failures
- Thermostat miscalibration causing the system to short-cycle or run continuously
- Ductwork leaks or blockages reduce heat delivery to specific rooms
Every diagnostic visit begins with a thorough inspection. Our technicians explain what they find in plain language, walk you through your repair options, and provide a flat-rate price before we start. No pressure, no surprises.
- Furnace not producing heat or producing insufficient heat
- Pilot light or igniter failures on gas furnaces
- Faulty heat exchanger (a serious safety concern that causes carbon monoxide risk)
- Blower motor issues causing weak or no airflow
- Heat pump running in cooling mode or failing to switch to heat mode
- Tripped breakers, blown fuses, or electrical control failures
- Thermostat miscalibration causing the system to short-cycle or run continuously
- Ductwork leaks or blockages reduce heat delivery to specific rooms
Every diagnostic visit begins with a thorough inspection. Our technicians explain what they find in plain language, walk you through your repair options, and provide a flat-rate price before we start. No pressure, no surprises.
Your Comfort Starts Here
Honest Repairs, Backed By Real Standards
HAT Plumbing, Heating & Air operates on a straightforward principle: diagnose accurately, explain clearly, and fix it right the first time. Our technicians hold active licensure through the Texas Department of Licensing and Regulation (TDLR) and carry full insurance coverage on every job. Before any repair work begins, we present the diagnosis and the cost in plain language — no pressure, no upselling, no surprise charges when the job is done.
All repair work is backed by a warranty, and our satisfaction guarantee covers every job we take on. Free estimates are available for clients evaluating repair costs against replacement. For membership plan customers, emergency repair response is available when a technician is on hand, with priority scheduling as a plan benefit.
We serve Fort Worth and surrounding Tarrant County communities for residential heating repairs. If your property also needs heating maintenance or you want to prevent the next repair call, we can schedule a maintenance visit alongside any repair service.
Heating Repair Frequently Asked Questions
How do I know if my heating system needs repair or replacement?
Age, repair history, and efficiency are the three main factors. Furnaces and heat pumps typically last 15–20 years with proper maintenance. If your system is approaching or past that range and requires a significant repair, replacement may be the more practical path. Our technicians assess both options honestly during every service visit. The goal is to give you accurate information, not to steer you toward the higher-ticket option.
Why does my furnace keep turning on and off without reaching temperature?
This is called short-cycling, and it’s usually caused by one of a few things: a dirty or clogged air filter restricting airflow, an overheating heat exchanger triggering the safety shutoff, a faulty flame sensor, or a thermostat issue. All of these are diagnosable and repairable. Short-cycling isn’t just uncomfortable, it puts extra wear on the system and drives up energy costs if left unaddressed.
Do you repair heat pumps as well as gas furnaces?
Yes. Our technicians are trained in both heat pump and gas furnace systems. Heat pump repairs often involve refrigerant handling, compressor issues, reversing valve failures, and defrost cycle problems, all of which require licensed HVAC technicians with proper certification. We service residential heat pump systems throughout the Fort Worth area.
The Values Behind Every Service Call
Dependable Service, Clear Communication, And Quality You Can Count On.
On-Time & Ready to Work
We respect your schedule and show up prepared to get the job done right the first time.
Honest Service, No Surprises
Clear communication, upfront pricing, and recommendations you can trust.
Comfort You Can Count On
Reliable plumbing, heating, and cooling solutions that keep your home running smoothly year-round.
Can a heating repair affect my energy bills?
Yes, significantly. A system running with a dirty filter, a faulty blower motor, or a refrigerant issue (for heat pumps) has to work harder to hit your thermostat setting. The U.S. Department of Energy notes that HVAC systems in poor condition can use up to 30% more energy than a properly functioning unit. Addressing repairs promptly keeps your system operating closer to its rated efficiency.
What should I do if my heating system stops working after hours?
Call (817) 405-4575 . Emergency heating repair responses are available for membership plan clients when a technician is on hand. For non-membership clients, we can often accommodate same-day or next-morning appointments. In the meantime, if the situation involves suspected carbon monoxide, evacuate the property and contact emergency services before calling us.
We Help Your Heating System Get Back on Track
A heating system that isn’t working right isn’t just uncomfortable; it creates real problems for your home. HAT Plumbing, Heating & Air diagnoses and repairs heating issues across Fort Worth and Tarrant County with the kind of straightforward service that keeps customers coming back. Flat-rate pricing, licensed technicians, and a warranty on every repair.
Call (817) 405-4575 to speak with our team directly or submit a service request online. Same-day and weekend appointments are available, and membership plan holders receive priority access when you need us most.
24/7 Heating Repair When It Matters Most
Fort Worth doesn't see many freezing nights, but when a cold front drops temperatures fast, a heater that won't run becomes urgent, especially with kids, older family members or pets at home. We're open 24 hours a day, 7 days a week, and we work on the parts that usually fail on cold nights, including igniters, flame sensors, capacitors, inducer motors and control boards. You'll get the repair price before any work starts.
Before you call, check that the thermostat is set to heat, the filter isn't clogged and the furnace switch and breaker are on. If you smell gas, leave the house and call from outside. If it's still not working, call (817) 405-4575. If a repair doesn't make sense for an older system, we'll tell you and walk you through furnace replacement options.
Don't Take Our Word For It
Trusted By Your Neighbors For Reliable Service
★★★★★“We Were Very Impressed!”
“We were very impressed with the responsiveness and attention to detail with Hat Plumbing. Huge thanks to Andrew and team for ensuring our job was done before the big freeze hit.”
- Justin H.
★★★★★“They Did a Fantastic Job!”
“Our tub was not draining. Andrew and Junior just left and they did a fantastic job. Tub drains fast and clean. Very impressed with both of them and there services.”
- Dennis L.
★★★★★“Would Highly Recommend Joe and His Entire Team!”
“We had an urgent plumbing need during the holidays and I reached out to Hat Plumbing. We could not have been more pleased with their responsiveness, attention to detail, thoroughness, and follow up afterwards.”
- Humberto G.
Frequently Asked Questions
Why is my furnace blowing cold air?
A furnace blowing cold air can be caused by a thermostat set to fan instead of auto, a dirty filter causing the system to overheat and shut off the burners, or an ignition or pilot problem. Check the thermostat and filter first. If the air is still cold, turn the system off and call us for a diagnosis.
Why is my heat pump outdoor unit covered in ice?
A light layer of frost in cold weather is normal, and the heat pump runs defrost cycles to clear it. A thick coating of ice that does not melt points to a problem, such as a failed defrost control, low refrigerant, or a fan issue. Turn the system to emergency heat if available and schedule a repair.
Is a strange noise from my furnace something to worry about?
Some noises deserve attention. Squealing can point to a blower motor or belt issue, banging or booming at startup can mean delayed ignition, and rattling may be a loose panel or part. A clicking furnace that will not light may have an ignition problem. If a new noise starts, have the system checked before it fails.
How does pricing work for heating repairs?
We diagnose the problem first, then give you a flat-rate price for the repair before we start. There are no after-the-fact add-ons, and the invoice matches the price you approved. Free estimates are available when you are weighing repair against replacement. Stetson Select members receive 15% off repairs and a waived service fee.
Love the Service? Tip Your Hat with a 5-Star Review!
Had a great experience with HAT Plumbing Heating & Air? We’d be honored if you shared it with a 5-star review! Your kind words help more homeowners find dependable plumbing, heating, and cooling experts they can trust—and they let our team know their hard work is making a difference. Thanks for helping us keep homes comfortable, one review at a time!
Leave a Review